Whether you’re moving into your first apartment or refinishing the floors in your dream home, it’s highly likely that your hardwood floors will be covered with rug pad marks. No matter how careful you are when installing rugs, it’s nearly impossible to avoid this one common flooring problem.
But, if you follow these seven steps, you’ll have these rug pad marks removed and your hardwood floors looking like new in no time!
Which adhesive cleaner do I recommend for this process?
Goo Gone Adhesive Remover is great for this process because it’s specifically designed to remove adhesives. Plus, it’s easy to use and won’t damage your floors. Here’s how to remove rug pad marks from hardwood floors using Goo Gone Adhesive Remover:
1. Pour a small amount of Goo Gone onto the affected area.
2. Gently rub the solution into the mark with a clean cloth.
3. Wipe away any excess cleaner with a damp cloth.
4. Repeat steps 2-3 until the mark is gone.
5. Once the mark is gone, wipe the area with a clean, dry cloth to remove any residue.
Why do I recommend the Goo Gone Adhesive Remover?
1. It’s affordable.
2. It’s easy to find (you can buy it at most hardware stores).
3. It’s gentle (won’t damage your floors).
4. It works on a variety of surfaces (not just hardwood floors).
5. It comes in a small bottle (so you don’t have to worry about it taking up too much space).
6. The applicator is small and easy to use.
7. It has a pleasant citrus scent. 8. You only need to wipe the Goo Gone Adhesive Remover on the area, let it sit for 30 seconds, then wipe off with a clean cloth or paper towel.
9. It will leave your floor looking like new!
10. And that’s why I recommend Goo Gone Adhesive Remover for removing rug pad marks from hardwood floors in seven steps!
1) Vacuum
The first step is to vacuum your floor. This will help remove any loose dirt or debris that could be making the marks more visible. Be sure to use a soft-bristled attachment so you don’t scratch the floor.
Next, mix a solution of equal parts water and white vinegar.
In a bucket or bowl, mix together equal parts water and white vinegar. You can also add a few drops of dish soap to this mixture if you’d like. Dip a clean cloth into the solution and wring it out so it’s damp but not dripping wet.
2) Gently scrape off excess adhesive
If there’s any excess adhesive left on the floor after you’ve removed the rug pad, you can gently scrape it off with a putty knife. Be careful not to scratch the floor. If the adhesive is stubborn, you can use an adhesive remover like Goo Gone.
Just apply a small amount to a rag and rub it into the adhesive. Let it sit for a few minutes, then wipe it away with a clean rag.
3) Neutralize Residue with Acetone
start by mixing some dish soap with warm water in a bucket. Then, dampen a sponge or rag in the mixture and start scrubbing at the rug pad marks. If they’re stubborn, you can use a stiff-bristled brush. Once you’ve removed the marks, rinse the area with clean water and dry it off with a towel.
4) Wash with soapy water
The first step is to mix some mild dish soap with warm water and put it in a spray bottle. Then, you’ll want to lightly mist the area with the soapy water and let it sit for a few minutes. After that, use a soft-bristled brush or sponge to scrub the area in a circular motion.
You may need to do this a few times to get all of the rug pad marks out. Once you’re finished scrubbing, rinse the area with clean water and dry it off with a towel.
5) Soften Residue with Mineral Spirits
Before you start scrubbing, soften the residue with mineral spirits. This will help break down the adhesive so it’s easier to remove. Pour a small amount of mineral spirits onto a clean rag and lightly rub it over the rug pad marks. Let it sit for a few minutes before moving on to the next step.
6) Scrub Spot with Scouring Pads
You’ll need: -A bucket of warm water -A few drops of dish soap -Scouring pads -Paper towels or a clean rag First, fill your bucket with warm water and add a few drops of dish soap. Next, take your scouring pad and scrub the rug pad marks.
You may need to apply some elbow grease, but eventually the marks should start to disappear. If they’re not coming up, you can try using a little bit more soap or scrubbing a bit harder.
Once the marks are gone, take your paper towel or clean rag and wipe away any soap residue. And that’s it! Your hardwood floors should now be mark-free.
7) Buff Floor to Shine
You can try buffing your floor with a soft cloth to remove the marks. If that doesn’t work, you can try using a little bit of dish soap and water. Make sure to rinse the area well afterwards. You can also try using white vinegar or lemon juice.
Just be sure to test a small area first to make sure it doesn’t damage your floors. If all else fails, you can always sand the area and refinish your floors.
Final Word
In conclusion, removing rug pad marks from hardwood floors is not as difficult as it may seem. With a little elbow grease and the right tools, you can have your floors looking like new again in no time. Thanks for reading and good luck!
Table of Contents